INSTGL2 = Insta-Cure Gap Filling Glue 2 Ounce

• A higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps.
• Normally the thicker CA is applied to one surface and then the parts are held tightly together for about 5-15 seconds.
• For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive
• Full strength is reached in three hours
• Refrigerate to extend shelf life
• Cured CA is stable from -40 to 220° F
• Soak tip in acetone for cleaning

INSTAC INSTA-SET™ Accelerator Glue - 2 oz

• INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.
• INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together.
• Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength.
• For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface.
• When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

Blondle Include

• 1 x INSTGL2
• 1 x INSTAC